B11 · Faraday's law with the unknown chosen · Notes and practice

Download the printable PDF

Start the Faraday chain from the given quantities to find a current, a time, an ion charge or a mass, and use the same charge in cells in series.

Open the complete lesson

Type in the blanks; your notes save on this device only. Use the backup controls at the bottom to keep a portable copy. Nothing is submitted.

1. One chain, any unknown

Choose the direction

In B10 we built one chain: current and time give , charge gives moles of electrons, the half-reaction gives moles of , and the molar mass gives the .

Every Faraday problem uses this same chain. Only the given end and the asked end change.

So write the and the question first. Then start at a given and walk toward the .

If the mass is given, go . Multiply by the coefficient of the electrons and then by . Going forward, you divide, because each step reverses.

On the diploma: many wrong options divide when they should multiply, or the other way round.

Watch: Two kinds of question (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 2:04)

Watch: Working backward from the mass (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 20:02)

Find a current

A copper cathode gains 1.25 g in 40.0 min from Cu²⁺. The mass is given, so start there: n(Cu) = 1.25 ÷ 63.55 = mol.

Cu²⁺ + 2e⁻ → Cu, so multiply by 2: n(e⁻) = mol. Moles to coulombs means multiply by F.

q = 0.03934 × (9.65 × 10⁴) = C. The time is 40.0 × 60 = 2400 s, so I = q ÷ t = 3796 ÷ 2400 = .

Leaving the time in minutes would make the current 60 times too big. On the diploma: write givens with units, like t = 40.0 min, so you see what to convert.

Zn/Cu cell, 0.500 A for 30.0 min. q = _______n(e⁻) = 900 ÷ (9.65 × 10⁴) = _______Zn → Zn²⁺ + 2e⁻, so zinc lost = _______Cu²⁺ + 2e⁻ → Cu, so copper gained = _______
Zinc and copper voltaic cell delivering a current. Give the charge, the moles of electrons and the mass lost and gained.

2. Ion charge and the voltaic cell

Find the ion charge

Sometimes the ion is the mystery. Let z be the number of electrons each ion gains. Given 2.00 A for 20.0 min and 0.790 g of a metal with M = 63.55 g/mol.

The time is 1200 s, so q = C and n(e⁻) = 2400 ÷ (9.65 × 10⁴) = mol.

n(metal) = 0.790 ÷ 63.55 = mol. Dividing electrons by atoms gives electrons per atom: z = , so the ion is M²⁺.

z must be a number, because ion charges are whole numbers. Round to the nearest integer. On the diploma: do not report 2.0007.

The chain in a voltaic cell

An electrode is a piece of metal where a half-reaction happens. In a voltaic cell, the electrons in the wire come from the and go to the .

So the same chain links the charge to the mass at both electrodes. A Zn/Cu cell gives 0.500 A for 30.0 min: q = 0.500 × 1800 = C.

Then n(e⁻) = 900 ÷ (9.65 × 10⁴) = mol. Both half-reactions use 2 electrons per atom, so n(Zn) = n(Cu) = mol.

The zinc anode loses 0.004663 × 65.41 = g. The copper cathode gains 0.004663 × 63.55 = g. The moles are equal, but the molar are different.

On the diploma: say which electrode loses mass and which gains mass.

3. Gases, mass gained and the anode

Gases from water

Na₂SO₄(aq) is electrolyzed with inert electrodes, which carry electrons but do not react. At 2.00 A for 30.0 min, q = C and n(e⁻) = mol.

Reduction: 2H₂O + 2e⁻ → H₂ + 2OH⁻. It makes one H₂ for two electrons, so n(H₂) = 0.0373 ÷ 2 = mol.

Oxidation: 2H₂O → O₂ + 4H⁺ + 4e⁻. It makes one O₂ for four electrons, so n(O₂) = 0.0373 ÷ 4 = mol.

The same electrons pass through the whole circuit. Hydrogen forms in a ratio of to with oxygen, as in 2H₂O → 2H₂ + O₂.

On the diploma: a wrong option divides by 2 for oxygen. Use the 4 from the oxidation half-reaction.

Mass gained and mass lost

Use the mass by the cathode. A cathode that goes from 14.20 g to 14.85 g gained g.

With 1.50 A, n(Cu) = 0.65 ÷ 63.55 = 0.01023 mol and n(e⁻) = 0.02046 mol. Then q = 1974 C and t = 1974 ÷ 1.50 = s, or 21.9 min.

In copper refining, the anode loses mass: Cu → Cu²⁺ + 2e⁻. For 10.0 A for 2.00 h, the time is 7200 s and q = C.

Then n(e⁻) = 0.746 mol and n(Cu) = 0.373 mol, so the anode loses g of copper. If no electrons go to side reactions, the pure cathode gains the same amount.

Use the diagram response box for labels and arrows in words, or draw on the printable PDF.

Answer the 12 core practice problems online · Completed notes and worked key

B11-P01

A cathode gains 0.850 g of silver in 15.0 minutes from Ag⁺ + e⁻ → Ag (M = 107.87 g/mol). Find the constant current.

Response: ____________________

B11-P02

A cathode gains 2.50 g of nickel in 30.0 minutes from Ni²⁺ + 2e⁻ → Ni (M = 58.69 g/mol). Find the current.

Response: ____________________

B11-P03

A student finds the current by dividing the charge by the time in minutes. Explain the error and the fix.

Response: ____________________

B11-P04

Given 1.50 A for 30.0 minutes and 0.485 g of a metal deposited (M = 52.00 g/mol). Find the charge on the metal ion.

Response: ____________________

B11-P05

A calculation of z gives 2.96. Explain why we state z = 3 and what the small difference tells us.

Response: ____________________

B11-P06

A zinc and copper voltaic cell gives 0.800 A for 45.0 minutes. Find the mass of zinc lost from the anode (M = 65.41 g/mol).

Response: ____________________

B11-P07

For the same cell, find the mass of copper gained at the cathode (M = 63.55 g/mol), and explain why the two masses are different.

Response: ____________________

B11-P08

Na₂SO₄(aq) is electrolyzed with inert electrodes at 3.00 A for 20.0 minutes. Find the moles of hydrogen and oxygen formed.

Response: ____________________

B11-P09

For the same electrolysis, find the mass of hydrogen formed (M = 2.02 g/mol) and state the ratio of hydrogen to oxygen by moles.

Response: ____________________

B11-P10

A cathode of 20.00 g has a mass of 21.20 g after copper plating at 2.00 A. Find the time in minutes (M = 63.55 g/mol).

Response: ____________________

B11-P11

A copper anode in a refining cell runs at 5.00 A for 90.0 minutes. Find the mass lost by the anode (M = 63.55 g/mol).

Response: ____________________

B11-P12

A student uses the final mass of a cathode, 21.20 g, to find a plating time. Explain the error and say whether the time is too large or too small.

Response: ____________________