B11 · Extra diploma-style practice · Solutions

Download PDF · Answer online

B11-D01

A cathode gains 3.18 g of copper in 1000 s from Cu²⁺ + 2e⁻ → Cu. What constant current was used, in amperes to two decimal places? Use M = 63.55 g/mol.

  1. n(Cu) = 3.18 ÷ 63.55 = 0.05004 mol, so n(e⁻) = 0.10008 mol. q = 0.10008 × (9.65 × 10⁴) = 9658 C and I = 9658 ÷ 1000 = 9.66 A.
  2. Start from the mass and go backward through the chain.

B11-D02

Copper is plated at 2.00 A. A mass of 1.271 g forms from Cu²⁺ + 2e⁻ → Cu. How long did the plating run, in seconds? Enter an integer. Use M = 63.55 g/mol.

  1. n(Cu) = 1.271 ÷ 63.55 = 0.02000 mol, so n(e⁻) = 0.04000 mol. q = 3860 C and t = 3860 ÷ 2.00 = 1930 s.
  2. Use t = q ÷ I after finding the charge.

B11-D03

A metal of molar mass 107.87 g/mol is plated by 1.00 A for 965 s. A mass of 1.08 g forms. What is the charge on the ion? Enter an integer.

  1. q = 965 C and n(e⁻) = 0.0100 mol. n(metal) = 1.08 ÷ 107.87 = 0.01001 mol. z = 0.0100 ÷ 0.01001 = 1.
  2. Divide the moles of electrons by the moles of metal.

B11-D04

A zinc and copper voltaic cell gives 0.500 A for 30.0 minutes. What mass of zinc dissolves from the anode, in grams to three decimal places? Use M = 65.41 g/mol.

  1. q = 0.500 × 1800 = 900 C and n(e⁻) = 0.009326 mol. Zn → Zn²⁺ + 2e⁻, so n(Zn) = 0.004663 mol and m = 0.305 g.
  2. The electrons in the wire come from the zinc half-reaction.

B11-D05

In a voltaic cell, which electrode loses mass and which gains mass?

  1. The anode loses mass and the cathode gains mass
  2. The cathode loses mass and the anode gains mass
  3. Both electrodes gain mass
  4. Both electrodes lose mass
  1. Metal is oxidized at the anode and dissolves. Metal ions are reduced at the cathode and deposit.
  2. Oxidation happens at the anode.

B11-D06

Aqueous Na₂SO₄ is electrolyzed with inert electrodes at 1.50 A for 1930 s. How many moles of hydrogen form, to four decimal places?

  1. q = 1.50 × 1930 = 2895 C and n(e⁻) = 0.0300 mol. 2H₂O + 2e⁻ → H₂ + 2OH⁻, so n(H₂) = 0.0150 mol.
  2. Divide the moles of electrons by 2 for hydrogen.

B11-D07

For the same electrolysis, how many moles of oxygen form, to four decimal places?

  1. 2H₂O → O₂ + 4H⁺ + 4e⁻, so n(O₂) = 0.0300 ÷ 4 = 0.0075 mol.
  2. Divide the moles of electrons by 4 for oxygen.

B11-D08

Which quantity is found first when the mass of metal and the current are given and the time is asked?

  1. The moles of metal
  2. The charge
  3. The time
  4. The moles of electrons
  1. Start from the mass and find the moles of metal. Then find the electrons, the charge and the time.
  2. Start at a given and move toward the unknown.

B11-D09

Select every correct statement about finding the mass from a cathode weighed before and after plating.

  1. Use the gain in mass
  2. Use the final mass
  3. The starting mass was not made by the current
  4. Subtract the starting mass from the final mass
  1. Only the gain was made by the current, so subtract the starting mass from the final mass.
  2. The final mass includes the starting mass.

B11-D10

Arrange the steps for finding an unknown ion charge z.

First to last

  1. Divide the moles of electrons by the moles of metal
  2. Find the moles of metal from the mass
  3. Find the charge and the moles of electrons
  4. Round z to a whole number
  1. Find the electrons, find the metal, divide the electrons by the metal, then round to a whole number.
  2. z is the electrons for each ion.

B11-D11

Match each unknown to the quantity that is found immediately before it in the chain.

Items

  1. Mass of metal
  2. Moles of electrons
  3. Charge
  4. Current

Targets

  1. Charge
  2. Moles of metal
  3. Moles of electrons
  4. Charge and time
  1. The chain is charge, moles of electrons, moles of metal, then mass. The current comes from the charge and the time.
  2. Follow the direction of the chain.

B11-D12

A student uses the final mass of a cathode to find the time. Explain whether the time is too large or too small.

  1. The final mass includes the starting mass, which the current did not make, so the time is too large.
  2. Use the gain in mass only.