B10 · Faraday's law · Notes and practice
Download the printable PDF
Find the charge from current and time, change it to moles of electrons, use a half-reaction to find moles of metal, and find a mass or a time.
Open the complete lesson
Type in the blanks; your notes save on this device only. Use the backup controls at the bottom to keep a portable copy. Nothing is submitted.
1. Charge and moles of electrons
Current is charge per second
Electric charge is the amount of electricity that moves. We measure it in , C. Current is how much charge passes a point each second.
Current is measured in amperes, A. One ampere is one each second. So charge equals current times time: q = .
An ampere already has seconds built in, so the time must be in . For 2.50 A for 10.0 min, the time is 10.0 × 60 = s.
Then q = 2.50 × 600 = . On the diploma: leaving the time in minutes or hours is one of the most common wrong options.
Watch: Current is coulombs per second (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 3:32)
Watch: Change hours and minutes to seconds (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 4:16)
The Faraday constant
Chemistry counts in moles, so we need a number that links coulombs to moles. One mole of electrons carries C.
This is the Faraday constant, F. Look it up in the . Think of it as a molar mass for charge.
To change coulombs into moles of electrons, divide: n(e⁻) = q ÷ . The coulombs cancel and moles are left.
For 1500 C, n(e⁻) = 1500 ÷ (9.65 × 10⁴) = . That is a small piece of one mole, so a small answer makes sense.
On the diploma: a common wrong option multiplies by F when it should divide.
Watch: Faraday’s constant: the charge on one mole of electrons (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 4:59)
Watch: Moles of electrons = current × time ÷ F (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 6:22)
Faraday chain for a copper cathode. Give the charge, the moles of electrons, the moles of copper and the mass.2. Moles of metal and mass
Use the half-reaction as the ratio
Moles of electrons are not yet moles of metal. The reduction half-reaction at the cathode gives the ratio, because it shows how many electrons one atom needs.
In Cu²⁺ + 2e⁻ → Cu, mol of electrons make 1 mol of copper. In Ag⁺ + e⁻ → Ag, 1 mol of electrons makes mol of silver.
In Al³⁺ + 3e⁻ → Al, three electrons make one atom, so divide the moles of electrons by . The ion charge sets the ratio.
Always write the half-reaction first. On the diploma: a wrong option often uses the wrong ratio, like 1 to 1 for copper.
Watch: Use the half-reaction, not the whole equation (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 1:24)
Watch: The coefficients give electrons to metal (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 12:31)
The full chain
Let’s put the links together. Zinc is plated by 3.00 A for 25.0 min. The time is 25.0 × 60 = s, so q = 3.00 × 1500 = C.
Then n(e⁻) = 4500 ÷ (9.65 × 10⁴) = mol. In Zn²⁺ + 2e⁻ → Zn, each zinc atom needs two electrons, so n(Zn) = mol.
Mass is moles times molar mass: m = 0.0233 × 65.41 = . The path is charge, moles of electrons, moles of metal, then mass.
As one formula, m = ÷ (zF). M is the molar mass and z is the number of electrons for one .
On the diploma: if a formula is given, check that t is in seconds and that z matches the half-reaction.
Watch: Example: zinc plated on a nail (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 7:45)
Watch: Change minutes to seconds (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 10:27)
Watch: Moles to mass (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 13:51)
Watch: Second example: copper on nickel (Alberta Chemistry Teacher, “Chemistry 30 - Cell stoichiometry theory and examples”, 15:55)
3. Running the chain backward
Find a time
Now run the chain backward. We want 1.00 g of aluminium at 5.00 A. Start at the given, the mass, and find the moles first.
n(Al) = 1.00 ÷ 26.98 = mol. In Al³⁺ + 3e⁻ → Al, each atom needs three electrons. Going backward we multiply: n(e⁻) = mol.
Moles of electrons to coulombs means multiply by F: q = 0.1112 × (9.65 × 10⁴) = C.
Since q = It, the time is t = q ÷ I = 1.073 × 10⁴ ÷ 5.00 = s. Divide by 60 to get min.
On the diploma: check which unit the question wants for time. A wrong option divides by three where you should multiply.
What the calculation assumes
The calculation assumes all the makes the product in the half-reaction. Real cells can lose some charge to reactions, which are other unwanted reactions.
Mass deposited is the in mass of the cathode, not its mass. The cathode already had some mass before the current started.
On the diploma: if a question gives two weighings of the cathode, use the difference, not the final reading.
Use the diagram response box for labels and arrows in words, or draw on the printable PDF.
Answer the 12 core practice problems online · Completed notes and worked key
B10-P01
A current of 3.50 A flows for 12.0 minutes. Find the charge that moves.
Response: ____________________
B10-P02
A student calculates the charge for 2.00 A and 15 minutes as 30 C. Find the correct charge and explain the error.
Response: ____________________
B10-P03
A charge of 2.52 × 10³ C passes through a cell. Find the moles of electrons (F = 9.65 × 10⁴ C/mol e⁻).
Response: ____________________
B10-P04
Explain in one or two sentences what the Faraday constant is and why it works like a molar mass.
Response: ____________________
B10-P05
Given 0.0261 mol of electrons and the half-reaction Cu²⁺ + 2e⁻ → Cu. Find the moles of copper and its mass (M = 63.55 g/mol).
Response: ____________________
B10-P06
Given 0.0261 mol of electrons. Find the moles of aluminium formed from Al³⁺ + 3e⁻ → Al, and compare with silver from Ag⁺ + e⁻ → Ag.
Response: ____________________
B10-P07
Given 1.80 A for 40.0 minutes and Ag⁺ + e⁻ → Ag (M = 107.87 g/mol). Find the mass of silver deposited.
Response: ____________________
B10-P08
Given 2.40 A for 50.0 minutes and Zn²⁺ + 2e⁻ → Zn (M = 65.41 g/mol). Find the mass of zinc deposited.
Response: ____________________
B10-P09
Given Ni²⁺ + 2e⁻ → Ni. Use m = ItM ÷ (zF) to find the mass of nickel from 1.20 A for 50.0 minutes (M = 58.69 g/mol).
Response: ____________________
B10-P10
Given that 2.00 g of copper must form from Cu²⁺ at a steady 4.00 A (M = 63.55 g/mol). Find the time needed in minutes.
Response: ____________________
B10-P11
Given that 1.00 g of aluminium must form from Al³⁺ + 3e⁻ → Al at 2.50 A. Find the time in minutes (M = 26.98 g/mol).
Response: ____________________
B10-P12
A cathode has a mass of 18.40 g before plating and 19.10 g after. Find the mass deposited, and say why we use it and not 19.10 g.
Response: ____________________