All lessons

Energy conservation and two-dimensional motion of charges

Complete reading and printing route. Attempt each question before reading its feedback. All diagram stages are included below.

After the lesson: Investigate and connect: a short investigation, a data step and a real-world link.

Energy conservation for a charge in a field

Watch this part in the video

On a small screen, scroll sideways to read the labels.

In B6, lost potential energy became kinetic energy. Use that for a charged ball.
Symbols in this lesson:
Ep = electric potential energy · Ek = kinetic energy · E = electric field strength, in N/C (newtons per coulomb)
ΔV = potential difference (V) · Δd = gap between the plates (m) · L = plate length (m) · t = time (s)
vₓ, vᵧ = speeds along and across the plates · e = size of one electron’s charge · n = number of electrons
Givens: a charged pith ball (m = 2.00 × 10⁻⁴ kg, q = 1.5 × 10⁻⁸ C) is held at A in a uniform field with 4.0 × 10⁻⁷ J of electric potential energy, then released. At B it has 2.5 × 10⁻⁸ J of electric potential energy. Find its speed at B.

−+−+−+−+−+−++ABreleased from rest at A

Potential energy turns into kinetic energy

A pith ball is a light ball that holds charge. Ep is electric potential energy. Ek is kinetic energy.

  1. Energy is conserved: only the electric force acts.
  2. Ep at A + Ek at A = Ep at B + Ek at B.
  3. Starts at rest: Ek at A = 0.
  4. Ek at B = (4.0 − 0.25) × 10⁻⁷ J = 3.75 × 10⁻⁷ J.
  5. ½mv² = 3.75 × 10⁻⁷ J.
  6. v = √(2(3.75 × 10⁻⁷) ÷ (2.00 × 10⁻⁴)) = 6.12 × 10⁻² m/s.

The charge was not needed.

Givens: the same pith ball is released from rest at A, which has 4.0 × 10⁻⁷ J of electric potential energy. It reaches a point C where its electric potential energy is 1.0 × 10⁻⁷ J. Question: find its kinetic energy at C and say whether its speed there is greater or less than at B.

−+−+−+−+−+−+Ep at AEp at B4.00.25(×10⁻⁷ J)

When the energies are not given

Point C is new. The ball is the same, and it still starts from rest at A.

  1. Total at A = total at C.
  2. Ek at C = Ep at A − Ep at C.
  3. Compare Ek at C with 3.75 × 10⁻⁷ J at B.
  4. Same mass, so more Ek means more speed.

Say which point is faster, and why.

Diploma: compare the energies, then write one sentence.

Starting point if needed

Kinetic energy at C = potential energy at A − potential energy at C, because it starts at rest.

Compare after your attempt

Ek at C = Ep(A) − Ep(C) = 4.0 × 10⁻⁷ J − 1.0 × 10⁻⁷ J = 3.0 × 10⁻⁷ J.

At B the kinetic energy was 3.75 × 10⁻⁷ J, which is greater, so the ball is moving faster at B than at C.

A charge entering a uniform field sideways

Watch this part in the video

On a small screen, scroll sideways to read the labels.

On slide 1 the ball moved along the field. Now an electron enters across the field.
Givens: an electron enters the uniform field between parallel plates moving horizontally with speed vₓ. Gravity is too small to matter. The top plate is negative and the bottom plate is positive. Describe its motion.

−+−+−+−+−+−+−entersvₓv_y

Why the path is a parabola

The electron enters sideways with speed vₓ. The x direction is along the plates. Gravity is too small to matter.

  • The only force is electric. It points toward the positive plate.
  • It is at right angles to the plates.
  • No force acts along the plates, so vₓ stays the same.
  • Across the plates the force is constant, so the acceleration is constant.
  • A steady vₓ and a growing vertical speed make a parabola.

It is like a ball rolling off a table.

Givens: an electron enters the field between parallel plates moving horizontally; gravity is too small to matter. Question: complete the table for horizontal and vertical motion: net force, acceleration, velocity and motion type, then name the shape of the path.

horizontal (x)vertical (y)forceaccelerationvelocitymotion type

Fill in the two columns

Fill in a table. One column is horizontal (x). One is vertical (y).

  1. What is the net force (total force)?
  2. What is the acceleration? Net force = mass × acceleration.
  3. What is the velocity doing?
  4. Motion type: uniform (constant velocity) or uniformly accelerated?

Then name the shape of the path.

Compare after your attempt

Horizontal: net force zero, acceleration zero, constant velocity vₓ, uniform motion.

Vertical: constant electric force toward the positive plate, constant acceleration, vertical speed grows from zero, uniformly accelerated motion. The path is parabolic.

New situation: a proton enters the same field between the plates at the same horizontal speed as the electron did, beside the top plate. The top plate is negative and the bottom plate positive, as before. Question: compare the proton’s path with the electron’s path in direction and in how sharply it bends.

−+−+−+−+−+−+electron path+enters

A different charge in the same field

A proton enters at the same speed, beside the same top plate. The plates are as before.

  1. Find the force direction first. A positive charge is pushed toward the negative plate.
  2. Compare with the electron’s path.
  3. The charges are equal in size. The masses are not.
  4. Use a = qE/m (q is charge, E is field, m is mass). It sets how sharply the path bends.

Diploma: “compare” needs a direction, a size and a law as the reason.

Compare after your attempt

The proton is positive, so the force on it points toward the negative plate. The electron was pushed toward the positive plate, so the two curves bend in opposite directions.

The charges are equal in size, so the forces are equal. The proton’s mass is much larger, so a = qE/m is much smaller and its path is flatter. Both paths are parabolas.

From acceleration back to voltage

Watch this part in the video

On a small screen, scroll sideways to read the labels.

Slide 2 had a constant acceleration between the plates. That acceleration leads back to the voltage.
Givens: an electron (data sheet: m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C) between parallel plates has an acceleration of 3.00 × 10¹⁵ m/s². The plates are 0.0360 m apart. Find the potential difference between the plates.

electron: a = 3.00 × 10¹⁵ m/s², toward a plateplate gap Δd = 0.0360 mfind the potential difference ΔV

A chain of small formulas

Go backward, from acceleration to voltage. The charge q feels the force: 1.60 × 10⁻¹⁹ C for the electron.

  1. Only the electric force acts, so F = ma.
  2. F = (9.11 × 10⁻³¹)(3.00 × 10¹⁵) = 2.733 × 10⁻¹⁵ N.
  3. E = F/q.
  4. E = 2.733 × 10⁻¹⁵ ÷ (1.60 × 10⁻¹⁹) = 1.708 × 10⁴ N/C.
  5. ΔV = EΔd (from E = ΔV/Δd) = (1.708 × 10⁴)(0.0360) = 615 V.

Keep every digit. Round only the last answer.

Givens: an electron (data sheet: m = 9.11 × 10⁻³¹ kg, q = 1.60 × 10⁻¹⁹ C) has an acceleration of 2.50 × 10¹⁵ m/s² between plates 0.0480 m apart. Question: find the potential difference between the plates.

electron: a = 2.50 × 10¹⁵ m/s², toward a plateplate gap Δd = 0.0480 mfind the potential difference ΔV

Same chain, new numbers

Use the same chain with new numbers. The electron’s mass and charge are in the Givens.

  1. Write the chain in words first: acceleration, force, field, voltage.
  2. Force: net force = mass × acceleration.
  3. Field: E = F/q.
  4. Voltage: ΔV = EΔd.
  5. One small calculation at a time, with units.

Diploma: write the chain before the numbers.

Starting point if needed

Start with F = ma, because the electric force is the only force.

Compare after your attempt

F = ma = (9.11 × 10⁻³¹ kg)(2.50 × 10¹⁵ m/s²) = 2.278 × 10⁻¹⁵ N. E = F/q = 2.278 × 10⁻¹⁵ ÷ (1.60 × 10⁻¹⁹) = 1.4238 × 10⁴ N/C.

ΔV = EΔd = (1.4238 × 10⁴ V/m)(0.0480 m) = 683 V.

The full two-direction problem

Watch this part in the video

On a small screen, scroll sideways to read the labels.

Slide 2 gave the two directions. Slide 3 gave the steps to the voltage. Now join them.
Givens: an electron enters horizontally at vₓ = 4.00 × 10⁶ m/s beside one plate. The top plate is negative and the bottom plate is positive. L = 0.100 m is the length of the plates, and Δd = 0.0400 m is the gap between them. It just reaches the far end of the other plate. Find the potential difference between the plates.

+−+−+−+−+−+−−enterslength 0.100 m, entry speed 4.00 × 10⁶ m/sgap 0.0400 m

Time is the link

We want ΔV. The chain needs the acceleration, and the acceleration needs the time.

  1. Same time both ways. Along: t = L/vₓ = 0.100 ÷ (4.00 × 10⁶) = 2.50 × 10⁻⁸ s.
  2. Across: Physics 20 gives d = vᵢt + ½at².
  3. The starting vertical speed vᵢ is 0, so Δd = ½at².
  4. a = 2Δd/t² = 1.28 × 10¹⁴ m/s².
  5. F = ma = 1.166 × 10⁻¹⁶ N. E = F/q = 729 N/C. ΔV = EΔd = 29.2 V.

Principles used, in order: uniform motion, then uniform acceleration.

Givens: the same electron, entering at vₓ = 4.00 × 10⁶ m/s, has a constant acceleration of 1.28 × 10¹⁴ m/s² and travels 0.0400 m vertically as it crosses the plates. Question: find its speed as it leaves the plates and the angle of its velocity to the horizontal.

+−+−+−+−+−+−−enterslength 0.100 m, entry speed 4.00 × 10⁶ m/sgap 0.0400 m

How fast, and in what direction?

How fast is the electron as it leaves? The two directions do not affect each other.

  1. vₓ does not change.
  2. The final vertical speed is not the final speed.
  3. vᵧ² = 2ad (Physics 20: vf² = vi² + 2ad, with vi = 0). Here d = 0.0400 m, the vertical distance.
  4. vₓ and vᵧ are the sides of a right triangle. The speed is the hypotenuse.
  5. Angle from the horizontal: tan θ = vᵧ ÷ vₓ.

The path bends toward the positive plate.

Starting point if needed

Find the vertical speed with vᵧ² = 2ad (starting from zero), then combine it with vₓ as a right triangle.

Compare after your attempt

vᵧ = √(2ad) = √(2 × 1.28 × 10¹⁴ × 0.0400) = 3.20 × 10⁶ m/s. The horizontal component is unchanged at 4.00 × 10⁶ m/s.

v = √((4.00 × 10⁶)² + (3.20 × 10⁶)²) = 5.12 × 10⁶ m/s. The angle is tan⁻¹(3.20 ÷ 4.00) = 38.7° from the horizontal, toward the positive plate.

New situation: an electron enters horizontally at 3.00 × 10⁶ m/s beside one plate. The plates are 0.0800 m long (L) and 0.0300 m apart (Δd), and it just reaches the far end of the other plate. Question: find the potential difference between the plates, and name the two physics principles you used, in order.

+−+−+−+−+−+−−enterslength 0.0800 m, entry speed 3.00 × 10⁶ m/sgap 0.0300 m

Changed numbers, full chain

Use the same full chain with new numbers. Set up two columns first.

  1. Horizontal (x): the plate length L.
  2. Vertical (y): the gap Δd.
  3. Time links the columns.
  4. Time from x. Then acceleration from y. Then force, field, voltage.

Name the two principles in order. Put units on every line.

Diploma: show both columns so a marker can follow your order.

Compare after your attempt

Horizontal: t = L/vₓ = 0.0800 ÷ (3.00 × 10⁶) = 2.667 × 10⁻⁸ s. Vertical: Δd = ½at², so a = 2(0.0300) ÷ (2.667 × 10⁻⁸)² = 8.4354 × 10¹³, which is 8.44 × 10¹³ m/s².

F = ma = (9.11 × 10⁻³¹)(8.4354 × 10¹³) = 7.685 × 10⁻¹⁷ N. E = F/q = 480 N/C. ΔV = EΔd = (480)(0.0300) = 14.4 V. The principles used, in order: uniform motion, then uniform acceleration.

Method: how to solve a two-direction problem

On a small screen, scroll sideways to read the labels.

Use these five steps whenever a charge enters a uniform field sideways. They are the steps you just used in the full problem, written in one place. The example on the next slide is that same problem.

1Split x and y2List the givens3Find the time4Link a to ΔV5Combine v andangle

Method: two-direction problem

  1. Split. Two columns. Along the plates (x): constant speed. Across the plates (y): constant acceleration.
  2. List. Write the givens in each column. Sideways entry: the starting across speed is 0.
  3. Time. Time is the link. Get it from the column with enough numbers: t = L ÷ vₓ.
  4. Link. Across: Δd = ½at², F = ma, E = F ÷ q, ΔV = EΔd. Go forwards or backwards.
  5. Combine. vᵧ = at. v = √(vₓ² + vᵧ²). Angle = tan⁻¹(vᵧ ÷ vₓ) from the horizontal.

Check: vₓ never changes and vᵧ grows, so the final speed is bigger than vₓ.

Used again in: slide 6 and the B12 comparisons with a charge in a magnetic field.

Givens (the full problem you just solved): an electron enters at 4.00 × 10⁶ m/s beside one plate. The plates are 0.100 m long and 0.0400 m apart, and it just reaches the far end of the other plate. Match each line to its step.

1Split x and y2List the givens3Find the time4Link a to ΔV5Combine v andangle

Run-through: the full problem

  1. Step 1x: along the plates, constant speed. y: across the plates, constant acceleration.
  2. Step 2x: L = 0.100 m, vₓ = 4.00 × 10⁶ m/s. y: Δd = 0.0400 m, starting across speed 0. Find ΔV, then the speed and angle.
  3. Step 3Time from x: t = L ÷ vₓ = 0.100 ÷ (4.00 × 10⁶) = 2.50 × 10⁻⁸ s.
  4. Step 4a = 2Δd ÷ t² = 1.28 × 10¹⁴ m/s². F = ma = 1.166… × 10⁻¹⁶ N. E = F ÷ q = 728.8… N/C. ΔV = EΔd = 29.2 V. Keep the full values.
  5. Step 5vᵧ = at = (1.28 × 10¹⁴)(2.50 × 10⁻⁸) = 3.20 × 10⁶ m/s. v = √((4.00 × 10⁶)² + (3.20 × 10⁶)²) = 5.12 × 10⁶ m/s. Angle = tan⁻¹(3.20 ÷ 4.00) = 38.7° from the horizontal.

Where does the particle land?

Watch this part in the video

On a small screen, scroll sideways to read the labels.

Use the steps from slide 5 on a heavier particle.
Givens: an alpha particle (q = 3.20 × 10⁻¹⁹ C, m = 6.65 × 10⁻²⁷ kg) enters horizontally at 2.00 × 10⁵ m/s beside the top plate of a pair of plates 0.0260 m apart with 600 V across them. The top plate is positive and the bottom plate is negative. It lands on the bottom plate. Question: find the horizontal distance it travels. Record the answer as a.bc × 10ⁿ m.

+−+−+−+−+−+−+entersdistance x = ?0.0260 m600 Valpha, entry 2.00 × 10⁵ m/s

Diploma-style numerical response

An alpha particle enters beside the top plate and lands on the bottom plate. Find the horizontal distance it travels. The top plate is positive, so the alpha particle is pushed toward the bottom plate.

  1. Field: E = ΔV/Δd.
  2. Force and acceleration, using the alpha particle’s own charge and mass.
  3. Vertical: starting speed 0, so Δd = ½at². Find t.
  4. Horizontal: constant speed, x = vₓt.
  5. Check units. Write a.bc × 10ⁿ m.

Diploma: work in order and label each result.

Compare after your attempt

E = ΔV/Δd = 600 ÷ 0.0260 = 2.31 × 10⁴ V/m. a = qE/m = (3.20 × 10⁻¹⁹)(2.31 × 10⁴) ÷ (6.65 × 10⁻²⁷) = 1.11 × 10¹² m/s².

Vertically, Δd = ½at², so t = √(2 × 0.0260 ÷ (1.11 × 10¹²)) = 2.164 × 10⁻⁷ s. Horizontally, x = vₓt = (2.00 × 10⁵)(2.164 × 10⁻⁷) = 4.328 × 10⁻² m, which is 4.33 × 10⁻² m. Record 4.33 × 10⁻².

Still charges: the oil-drop experiment

On a small screen, scroll sideways to read the labels.

So far the charges moved. Now a charge is held still between the plates.
Givens: an oil drop of mass 1.96 × 10⁻¹⁵ kg hangs still between plates 0.0100 m apart with 400 V across them (data sheet: g = 9.81 m/s², e = 1.60 × 10⁻¹⁹ C). The top plate is positive. Find the charge on the drop and the number of extra electrons.

+−+−+−+−+−+−−Fₑ (up)mg (down)drop0.0100 m400 Vm = 1.96 × 10⁻¹⁵ kgforces balance: the drop is still

A drop held still: find its charge

A drop floats still, so its forces balance. A free-body diagram shows both. g = 9.81 m/s².

  1. Balance: electric force up = weight down. qE = mg.
  2. E = ΔV ÷ Δd = 400 ÷ 0.0100 = 4.00 × 10⁴ N/C.
  3. mg = (1.96 × 10⁻¹⁵)(9.81) = 1.9228… × 10⁻¹⁴ N.
  4. q = mg ÷ E = 4.807 × 10⁻¹⁹ C.
  5. Count: n = q ÷ e.
  6. n = 4.807 × 10⁻¹⁹ ÷ (1.60 × 10⁻¹⁹) = 3.004…, so 3.

Force up and field down, so the drop is negative.

Givens: a second drop of mass 3.26 × 10⁻¹⁵ kg hangs still between plates 0.0200 m apart with 500 V across them (data sheet: g = 9.81 m/s², e = 1.60 × 10⁻¹⁹ C). The top plate is positive. Question: find the charge on the drop and the number of extra electrons.

+−+−+−+−+−+−−Fₑ (up)mg (down)drop0.0200 m500 Vm = 3.26 × 10⁻¹⁵ kgq = ? n = ?

Another still drop

A second drop is also still. Use the same steps with new numbers.

  1. Field: E = ΔV ÷ Δd.
  2. Balance: qE = mg, so q = mg ÷ E.
  3. Count: n = q ÷ e.
  4. Round n to a whole number.

Diploma: electrons are counted, so n is a whole number.

Starting point if needed

The drop is still, so qE = mg. Find E from the voltage and the gap first.

Compare after your attempt

E = ΔV/Δd = 500 ÷ 0.0200 = 2.50 × 10⁴ N/C. The weight is mg = (3.26 × 10⁻¹⁵)(9.81) = 3.1981… × 10⁻¹⁴ N.

qE = mg gives q = 3.1981… × 10⁻¹⁴ ÷ (2.50 × 10⁴) = 1.279… × 10⁻¹⁸ C. Then n = q ÷ e = 1.2792… × 10⁻¹⁸ ÷ (1.60 × 10⁻¹⁹) = 7.995…, so 8 extra electrons.

Givens: Millikan measured the charge on many drops. Four of his values are 3.20, 4.80, 6.40 and 7.00 (each × 10⁻¹⁹ C). Question: which value cannot be right, and why? (data sheet: e = 1.60 × 10⁻¹⁹ C)

01e2e3e4e5esteps of e = 1.60 × 10⁻¹⁹ C3.20 × 10⁻¹⁹ C4.80 × 10⁻¹⁹ C6.40 × 10⁻¹⁹ C7.00 × 10⁻¹⁹ C

Why charge comes in units of e

Millikan measured many drops. Every charge fitted one pattern.

  • Each charge was a whole number times 1.60 × 10⁻¹⁹ C.
  • So charge comes in units. The smallest unit is e.
  • Divide each charge by e. A fraction means an error.

Rule: q = n × e, with n a whole number.

Starting point if needed

Divide each value by e. A real charge gives a whole number.

Compare after your attempt

3.20 ÷ 1.60 = 2, 4.80 ÷ 1.60 = 3, 6.40 ÷ 1.60 = 4, and 7.00 ÷ 1.60 = 4.375.

The value 7.00 × 10⁻¹⁹ C cannot be right, because it is not a whole number of electrons. Charge comes in whole units of e.

Practice question

A charged ball (m = 3.00 × 10⁻⁴ kg) is released from rest where its electric potential energy is 5.0 × 10⁻⁶ J. At another point its electric potential energy is 8.0 × 10⁻⁷ J. Find its kinetic energy and its speed there.

Hint

The potential energy lost becomes kinetic energy. Then ½mv² gives the speed.

Compare after your attempt

Ek = 5.0 × 10⁻⁶ − 8.0 × 10⁻⁷ = 4.2 × 10⁻⁶ J. v = √(2 × 4.2 × 10⁻⁶ ÷ (3.00 × 10⁻⁴)) = 0.167 m/s.

Practice question

A proton enters a uniform field between parallel plates moving parallel to the plates. Describe the horizontal and the vertical motion and name the shape of its path.

Hint

Make two columns: along the plates and across the plates.

Compare after your attempt

Horizontally there is no force, so the motion is uniform at constant speed. Vertically the electric force is constant, so the acceleration is constant and the vertical speed grows from zero. The path is parabolic.

Practice question

An electron has an acceleration of 4.00 × 10¹⁵ m/s² between plates 0.0250 m apart. Find the potential difference between the plates.

Hint

Follow the chain: F = ma, then E = F ÷ q, then ΔV = EΔd.

Compare after your attempt

F = ma = 3.64 × 10⁻¹⁵ N. E = F/q = 2.28 × 10⁴ N/C. ΔV = EΔd = 569 V.

Practice question

An electron enters horizontally at 5.00 × 10⁶ m/s beside one plate. The plates are 0.120 m long and 0.0500 m apart, and the electron just reaches the far end of the other plate. Find the potential difference between the plates, the speed of the electron as it leaves, and the angle of its velocity to the horizontal.

Hint

Get the time from the motion along the plates. Then use Δd = ½at² across the plates.

Compare after your attempt

t = 0.120 ÷ (5.00 × 10⁶) = 2.40 × 10⁻⁸ s. a = 2(0.0500) ÷ t² = 1.74 × 10¹⁴ m/s². F = 1.58 × 10⁻¹⁶ N. E = 989 N/C. ΔV = 49.4 V. vᵧ = √(2ad) = 4.17 × 10⁶ m/s. v = 6.51 × 10⁶ m/s at 39.8° to the horizontal.

Practice question

Name the two physics principles used to find the potential difference in the previous question, in the order you used them, and give one principle that describes the event but was not used.

Hint

Which direction did you use first? Which idea describes the event but was never written down?

Compare after your attempt

Uniform motion (horizontal) first, then uniform acceleration (vertical). Conservation of energy describes the event but was not used in the calculation.

Challenge question

Challenge: An oil drop of mass 2.61 × 10⁻¹⁵ kg carries 5 extra electrons. It hangs still between horizontal plates that are 0.0150 m apart. What is the potential difference between the plates? Use g = 9.81 m/s² and e = 1.60 × 10⁻¹⁹ C.

Hint

Find the charge from q = ne. The drop is at rest, so qE = mg. Then use ΔV = EΔd.

Compare after your attempt

The charge is q = ne = 5(1.60 × 10⁻¹⁹) = 8.00 × 10⁻¹⁹ C. The drop is at rest, so qE = mg. E = mg ÷ q = (2.61 × 10⁻¹⁵)(9.81) ÷ (8.00 × 10⁻¹⁹) = 3.20 × 10⁴ N/C. Then ΔV = EΔd = (3.20 × 10⁴)(0.0150) = 480 V.