Complete reading and printing route. Attempt each question before reading its feedback. All diagram stages are included below.
After the lesson: Investigate and connect: a short investigation, a data step and a real-world link.
On a small screen, scroll sideways to read the labels.
In B4, field lines came from point charges and from flat plates. Now compare the two.
Symbols in this lesson:
E = electric field strength, in N/C (newtons per coulomb) or V/m (volts per metre)
ΔV = potential difference (V) · Δd = distance between the plates (m) · q = charge (C)
F = force (N) · m = mass (kg) · a = acceleration (m/s²) · v = speed (m/s) · Ek = kinetic energy (J)
Givens: a field is a region where a test charge feels a force. Two sources are shown: a positive point charge, and two oppositely charged parallel plates. Field arrows show the force on a positive test charge.
A field is a region where a test charge feels a force. Arrows show the force on a positive test charge.
Givens: a small positive object is released from rest in each field and nothing else acts on it. Question: in each field, does its acceleration increase, decrease or stay the same as it moves, and what happens to its kinetic energy?
Predict for each field before you open the answer. The object starts at rest. Nothing else acts on it.
From B6: a positive object loses electric potential energy and gains kinetic energy.
Diploma: “describe” and “explain” need a reason, not only an answer.
The force on the object is F = qE. Ask whether E changes along its path.
Point charge: the object is pushed away and the field is weaker the farther it goes, so the force and the acceleration decrease. It still speeds up the whole way.
Plates: the field is uniform, so the force and the acceleration stay constant. In both cases the object loses electric potential energy and gains the same amount of kinetic energy.
On a small screen, scroll sideways to read the labels.
On slide 1, the field between plates was the same everywhere. Now find its size.
Givens: parallel plates are Δd = 0.020 m apart and the battery gives a potential difference ΔV = 250 V. Find the electric field strength between the plates.
A bigger voltage or a smaller gap makes a stronger field.
Formula: E = ΔV/Δd
Why: qΔV = qE × Δd (work = force × distance).
Direction: + plate to − plate. E = 250 V ÷ 0.020 m = 1.25 × 10⁴ V/m.
V/m = N/C, because 1 V = 1 J/C and 1 J = 1 N·m.
Plates only. A point charge uses E = kQ/r².
Givens: plates are 0.0150 m apart and connected to a 120 V battery. Question: find the field strength between the plates, then find the battery voltage needed for a field three times as strong with the same gap.
Use E = ΔV/Δd twice. In part 2 the gap stays the same and the field changes.
E = ΔV/Δd. For the second part rearrange to ΔV = EΔd.
E = ΔV ÷ Δd = 120 V ÷ 0.0150 m = 8.00 × 10³ V/m.
Three times the field is 2.40 × 10⁴ V/m. ΔV = EΔd = (2.40 × 10⁴ V/m)(0.0150 m) = 360 V, which is three times 120 V.
New situation: the battery voltage is kept the same while the plate gap is changed. The field is graphed against 1/Δd. The line passes through C = (25 m⁻¹, 4.5 × 10³ V/m) and D = (100 m⁻¹, 18.0 × 10³ V/m). Question: what does the slope of the line represent, and what is its value?
From B5: match the equation to y = mx. Here the battery voltage stays the same and the gap changes. E is graphed against 1/Δd.
Diploma: rewrite the equation to match y = mx first.
Match E = ΔV(1/Δd) to y = mx: the slope is the potential difference ΔV.
Slope = (18.0 × 10³ − 4.5 × 10³ V/m) ÷ (100 − 25 m⁻¹) = 1.35 × 10⁴ ÷ 75 = 180 V.
On a small screen, scroll sideways to read the labels.
Slide 2 gave the field between plates. Now find how a particle moves in it.
Givens: an alpha particle (q = 3.20 × 10⁻¹⁹ C, m = 6.65 × 10⁻²⁷ kg) starts from rest against the positive plate. The plates are Δd = 0.0200 m apart with ΔV = 175 V. Find its acceleration and its speed at the other plate.
Force gives acceleration. Energy gives speed. In B4, F = qE. Only the electric force acts, so ma = qE.
The field is uniform, so a is constant. Round once, at the end.
Givens: an electron (q = 1.60 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg) starts from rest in a uniform field of 4.00 × 10³ V/m. The plates are 0.0600 m apart. Question: find the final speed of the electron at the other plate.
This time the question gives E, not the voltage. The speed steps from B6 need a voltage.
Use the field and the gap to find ΔV, then start from rest with qΔV = ½mv².
ΔV = EΔd = (4.00 × 10³ V/m)(0.0600 m) = 240 V.
v = √(2qΔV/m) = √(2 × 1.60 × 10⁻¹⁹ × 240 ÷ (9.11 × 10⁻³¹)) = 9.18 × 10⁶ m/s.
New situation: a proton (q = 1.60 × 10⁻¹⁹ C, m = 1.67 × 10⁻²⁷ kg) starts from rest against the positive plate. The plates are 0.0150 m apart and the voltage is 300 V. Question: find its final speed using energy, then check the speed using the acceleration and the gap.
Use both routes on a proton, and check they agree. A proton has the same size of charge as an electron. Its mass is much bigger.
Use the proton’s mass, not the electron’s. If the answers differ, look for a power of ten.
Energy: v = √(2qΔV/m) = √(2 × 1.60 × 10⁻¹⁹ × 300 ÷ (1.67 × 10⁻²⁷)) = 2.40 × 10⁵ m/s.
Force: E = ΔV/Δd = 2.00 × 10⁴ V/m, a = qE/m = 1.92 × 10¹² m/s², and v = √(2aΔd) = 2.40 × 10⁵ m/s. The two routes agree.
Givens: an alpha particle (q = 3.20 × 10⁻¹⁹ C, m = 6.65 × 10⁻²⁷ kg) starts from rest between parallel plates 0.0100 m apart connected to a 500 V battery. Question: find the size of its acceleration. Record the answer as a.bc × 10ⁿ m/s².
This is a numerical response. A particle starts from rest between plates. Find its acceleration. You get a voltage and a gap, not a field.
Diploma: three significant digits. “Magnitude” means size, with no sign.
E = ΔV ÷ Δd = 500 V ÷ 0.0100 m = 5.00 × 10⁴ V/m.
a = qE/m = (3.20 × 10⁻¹⁹ C)(5.00 × 10⁴ V/m) ÷ (6.65 × 10⁻²⁷ kg) = 2.41 × 10¹² m/s². Record 2.41 × 10¹².
On a small screen, scroll sideways to read the labels.
Use this method, from slide 3, whenever a charge sits between parallel plates.
Check: Units: V/m, N, m/s², m/s. A speed stays well below the speed of light, 3.00 × 10⁸ m/s.
Used again in: the sideways-entry problems in B8 and the combined-force problems in B13.
Givens (the first question of slide 3): an alpha particle (q = 3.20 × 10⁻¹⁹ C, m = 6.65 × 10⁻²⁷ kg) starts from rest against the positive plate. The gap is 0.0200 m and the battery is 175 V.
The alpha particle in slide 3, step by step: it starts from rest against the positive plate, the gap is 0.0200 m and the battery is 175 V.
On a small screen, scroll sideways to read the labels.
On slide 3, each particle started from rest. Now the particle is already moving, as in B6.
Givens: an electron (q = 1.60 × 10⁻¹⁹ C, m = 9.11 × 10⁻³¹ kg) enters the gap at 2.00 × 10⁶ m/s toward the positive plate. The field is 3.00 × 10³ V/m and the gap is 0.0500 m. Question: find its speed at the positive plate.
The electron is already moving when it enters. It has kinetic energy, and the field adds more.
Check: the final speed is bigger than 2.00 × 10⁶ m/s.
Diploma: look for “enters at”. Do not drop the initial energy.
Find ΔV from E and Δd. Then add the initial kinetic energy to qΔV.
ΔV = EΔd = (3.00 × 10³ V/m)(0.0500 m) = 150 V. Initial kinetic energy = ½(9.11 × 10⁻³¹)(2.00 × 10⁶)² = 1.82 × 10⁻¹⁸ J. Energy gained = qΔV = 2.40 × 10⁻¹⁷ J.
Final kinetic energy = 2.58 × 10⁻¹⁷ J, so v = √(2 × 2.58 × 10⁻¹⁷ ÷ (9.11 × 10⁻³¹)) = 7.53 × 10⁶ m/s.
New situation: a proton (q = 1.60 × 10⁻¹⁹ C, m = 1.67 × 10⁻²⁷ kg) enters the gap moving at 4.0 × 10⁵ m/s toward the positive plate, which repels it. The potential difference is 400 V. Question: find its speed at the positive plate, and say how you know the answer makes sense.
This charge slows down. A proton moves toward the + plate. Like charges repel, so the plate pushes back.
Check: the final speed is smaller than the starting speed. Say so in your answer.
Initial kinetic energy = ½(1.67 × 10⁻²⁷)(4.0 × 10⁵)² = 1.34 × 10⁻¹⁶ J. The positive plate repels the proton, so it gives up qΔV = (1.60 × 10⁻¹⁹)(400) = 6.40 × 10⁻¹⁷ J.
Final kinetic energy = 1.336 × 10⁻¹⁶ − 6.40 × 10⁻¹⁷ = 6.96 × 10⁻¹⁷ J, so v = √(2 × 6.96 × 10⁻¹⁷ ÷ (1.67 × 10⁻²⁷)) = 2.89 × 10⁵ m/s. This is less than 4.0 × 10⁵ m/s, as it should be for a slowed charge.
Two parallel plates 0.0250 m apart are connected to a 200 V battery. Find the electric field strength between them, and the battery voltage that would give a field of 1.2 × 10⁴ V/m with the same gap.
Use E = ΔV/Δd. For the second part, rearrange it to ΔV = EΔd.
E = ΔV/Δd = 200 ÷ 0.0250 = 8.00 × 10³ V/m. ΔV = EΔd = (1.2 × 10⁴)(0.0250) = 300 V.
A positive object is released in the field of a negative point charge, and another is released in a uniform field between plates. Compare how the acceleration changes in each case.
Ask how the field strength changes along each path.
Near the point charge the object moves toward the source where the field is stronger, so its acceleration increases. In the uniform field the acceleration stays constant.
An electron starts from rest in a uniform field of 2.50 × 10³ V/m across plates 0.0800 m apart. Find its final speed.
Find ΔV = EΔd first. Then use qΔV = ½mv².
ΔV = EΔd = 200 V. v = √(2 × 1.60 × 10⁻¹⁹ × 200 ÷ (9.11 × 10⁻³¹)) = 8.38 × 10⁶ m/s.
A proton starts from rest between plates 0.0400 m apart with a potential difference of 800 V. Find its acceleration and its final speed.
Find the field, then a = qE/m. Use energy for the speed.
E = 800 ÷ 0.0400 = 2.00 × 10⁴ V/m. a = qE/m = 1.92 × 10¹² m/s². v = √(2 × 1.60 × 10⁻¹⁹ × 800 ÷ (1.67 × 10⁻²⁷)) = 3.92 × 10⁵ m/s.
A graph of electric field strength against 1/Δd for a fixed battery has a straight line through the origin with a slope of 150 V. What does the slope represent and what happens to the field if the gap is doubled?
Write E = ΔV × (1/Δd) and match it to y = mx.
The slope is the potential difference of the battery, 150 V. Doubling the gap halves the field.
Challenge: A proton (m = 1.67 × 10⁻²⁷ kg, q = 1.60 × 10⁻¹⁹ C) enters the gap between two plates at 2.0 × 10⁵ m/s, moving straight toward the positive plate. The potential difference between the plates is 400 V. Does the proton reach the positive plate? If not, what fraction of the gap does it cross before it stops?
Compare its starting kinetic energy with qΔV, the energy it must give up to cross the whole gap.
Starting kinetic energy = ½(1.67 × 10⁻²⁷)(2.0 × 10⁵)² = 3.34 × 10⁻¹⁷ J. To cross the whole gap it must give up qΔV = (1.60 × 10⁻¹⁹)(400) = 6.40 × 10⁻¹⁷ J. That is more than it has, so it does not reach the plate. The field is uniform, so the energy given up is proportional to the distance crossed. Fraction of the gap = 3.34 × 10⁻¹⁷ ÷ (6.40 × 10⁻¹⁷) = 0.522. It stops about halfway and is pushed back.