All lessons

Electric and magnetic fields together

Complete reading and printing route. Attempt each question before reading its feedback. All diagram stages are included below.

After the lesson: Investigate and connect: a short investigation, a data step and a real-world link.

Adding an electric and a magnetic force

Watch this part in the video

On a small screen, scroll sideways to read the labels.

Symbols in this lesson:
q = charge (C) · E = electric field strength, in N/C (newtons per coulomb) · v = speed (m/s)
B = magnetic field strength, in T (tesla) · F = force (N) · Fnet = net force (N)
m = mass (kg) · a = acceleration (m/s²) · ΔV = potential difference (V)
Givens: an electron moves at 3.50 × 10⁵ m/s to the right between two horizontal plates. The top plate is positive and the bottom plate is negative, so the electric field of 520 N/C points down. A magnetic field of 2.50 × 10⁻³ T points into the page in the same region. The data sheet gives the size of the electron’s charge: q = 1.60 × 10⁻¹⁹ C.

+−−E = 520 N/CB = 2.50 × 10⁻³ Tv = 3.50 × 10⁵ m/s

Two fields, two forces, one net force

Unlike B6 and B11, two forces act.

  • Electric: F = qE (charge q, electric field E).
  • Magnetic: F = qvB (speed v, magnetic field B).
  1. Top plate +, so E points down. Electric force on the electron: up, 8.32 × 10⁻¹⁷ N.
  2. Magnetic: (1.60 × 10⁻¹⁹)(3.50 × 10⁵)(2.50 × 10⁻³) = 1.40 × 10⁻¹⁶ N.
  3. Right hand: up for a positive charge, so down for the electron.
  4. Opposite forces: subtract. The larger sets the direction.
  5. Fnet = 1.40 × 10⁻¹⁶ − 8.32 × 10⁻¹⁷ = 5.68 × 10⁻¹⁷ N, down.

Givens: the electron in the picture enters the fields at 3.50 × 10⁵ m/s. The electric force is 8.32 × 10⁻¹⁷ N up and the magnetic force is 1.40 × 10⁻¹⁶ N down. The data sheet gives the electron’s mass: 9.11 × 10⁻³¹ kg. Question: what are the size and direction of the electron’s acceleration as it enters?

+−−E = 520 N/CB = 2.50 × 10⁻³ Tv = 3.50 × 10⁵ m/s

Acceleration at the moment of entry

Find the acceleration with Newton’s second law, Fnet = ma.

  1. Draw the free-body diagram: both forces on the electron.
  2. The forces are opposite, so subtract the sizes.
  3. The larger force sets the direction.
  4. Divide by the mass: a = Fnet ÷ m.
  5. Give the size and the direction.

This is the acceleration at the instant of entry.

Diploma: give size and direction. Round once, to 3 digits.

Starting point if needed

The forces are opposite, so subtract the sizes. The net force points the way of the larger force.

Compare after your attempt

The forces are in opposite directions, so Fnet = 1.40 × 10⁻¹⁶ N − 8.32 × 10⁻¹⁷ N = 5.68 × 10⁻¹⁷ N, in the direction of the larger force: down.

a = Fnet/m = (5.68 × 10⁻¹⁷ N)/(9.11 × 10⁻³¹ kg) = 6.23 × 10¹³ m/s², down. This is the acceleration at the instant of entry; the directions change as the path bends.

New situation: the plates and the electron are the same, but the magnetic field now points out of the page. Question: what are the size and direction of the electron’s acceleration as it enters?

+−−E = 520 N/CB = 2.50 × 10⁻³ Tv = 3.50 × 10⁵ m/s

Changed field: the same plates, field reversed

The electron and the plates are the same. The magnetic field now points out of the page.

  1. The plates did not change, so the electric force is the same.
  2. Use the right hand again. Reverse it for the electron.
  3. Do the forces point the same way or opposite ways?
  4. If they point the same way, add. Then a = Fnet ÷ m. Give the direction.

Compare with the last case. Say why the acceleration is bigger.

Compare after your attempt

With the field out of the page, the magnetic force on the electron is up. The electric force is also up, so the forces add: 8.32 × 10⁻¹⁷ + 1.40 × 10⁻¹⁶ = 2.23 × 10⁻¹⁶ N, up.

a = (2.23 × 10⁻¹⁶ N)/(9.11 × 10⁻³¹ kg) = 2.45 × 10¹⁴ m/s², up.

The velocity selector: v = E/B

Watch this part in the video

On a small screen, scroll sideways to read the labels.

On slide 1 the two forces were opposite but not equal. Now they are equal.
Givens: an electron moves between plates with an electric field E and a magnetic field B, at right angles to each other and to the velocity. The forces are opposite. The path through the region is straight.

+−−E = 1.20 × 10³ N/CB = 3.00 × 10⁻³ T

When the two forces cancel

A straight path means Fnet = 0. The forces are equal in size and opposite in direction.

  1. Use sizes only. The bars | | mean “ignore the sign”: |qE| = |qvB|.
  2. q is on both sides, so it cancels: E = vB.
  3. Only the speed v = E/B goes straight. This is a velocity selector.
  • v = (1.20 × 10³) ÷ (3.00 × 10⁻³) = 4.00 × 10⁵ m/s.
  • Unit: 1 T = 1 N/(C·m/s), so N/C ÷ T is m/s.
  • Mass and charge are not in v = E/B.

Givens: the top plate is positive and the bottom plate is negative, so E = 1.20 × 10³ N/C points down. B = 3.00 × 10⁻³ T points into the page. An electron enters moving to the right at 5.00 × 10⁵ m/s. The speed that passes straight through is 4.00 × 10⁵ m/s. Question: does the electron bend up or down, and why?

+−−E = 1.20 × 10³ N/CB = 3.00 × 10⁻³ Tv = 5.00 × 10⁵ m/s

A faster electron

This electron is faster: 5.00 × 10⁵ m/s. The selector passes 4.00 × 10⁵ m/s.

  1. Electric: E points down, so the electron is pushed up.
  2. Magnetic: the right hand gives up for a positive charge, so down for the electron.
  3. Only the magnetic force changes with speed.
  4. The larger force sets the bend: down.
Starting point if needed

The electric force stays the same; only the magnetic force grows with the speed.

Compare after your attempt

The electric force is qE = (1.60 × 10⁻¹⁹)(1.20 × 10³) = 1.92 × 10⁻¹⁶ N, up, and it does not depend on the speed.

The magnetic force is qvB = (1.60 × 10⁻¹⁹)(5.00 × 10⁵)(3.00 × 10⁻³) = 2.40 × 10⁻¹⁶ N, down. It is larger, so the electron bends down.

New situation: a proton enters the same fields at 4.00 × 10⁵ m/s. The top plate is positive, and the field points into the page. Question: does the proton pass straight through, and what does it do if the proton is replaced with an alpha particle at the same speed?

+−+v = 4.00 × 10⁵ m/s

Changed particle: a proton

Now try a proton and an alpha particle. The top plate is positive and B is into the page, so E points down.

  • A proton is positive, so each force is the reverse of the electron’s.
  • An alpha particle is a helium nucleus, +3.20 × 10⁻¹⁹ C (twice a proton).
  1. Electric: a positive charge is pushed the way E points: down.
  2. Magnetic: right hand, no reversing: up.
  3. The forces are opposite. Check with v = E/B.
Compare after your attempt

For a proton the electric force is down and the magnetic force is up, so they are still in opposite directions. The sizes cancel because v = E/B = 4.00 × 10⁵ m/s.

An alpha particle at the same speed also passes straight through, because the charge cancels in qE = qvB and the mass does not appear.

Givens: charged particles enter a region where an electric field E and a magnetic field B are at right angles to each other and to the velocity, with the forces opposite. Question: which particles pass straight through? A. Only particles of one charge sign, at any speed. B. Only particles with the speed E/B, whatever their mass and charge. C. Only particles with the mass that matches the field ratio. D. All particles, at any speed. Choose one letter.

+−−EB

Diploma-style multiple choice

This is a diploma multiple choice on the velocity selector. The options differ on charge sign, speed and mass.

  1. Start from a straight path: Fnet = 0.
  2. Write both forces. Set the sizes equal.
  3. See what cancels and what is left.
  4. Test each option against your equation.

Diploma: write the equation first. Do not choose by the wording.

Compare after your attempt

Answer B. A straight path needs |qE| = |qvB|, which gives v = E/B. The charge and mass drop out, so any particle with that speed passes.

A and D ignore the speed. C is wrong because the mass does not appear in the condition.

Method: how to solve a balance-of-forces problem

On a small screen, scroll sideways to read the labels.

Use this method, from slide 2, whenever a particle keeps a straight path while an electric and a magnetic force act.

1Draw the forces2Name each force3Say they balance4Set sizes equal5Check it

Method: how to solve a balance-of-forces problem

  1. Draw the particle and every force. One arrow per force: electric, magnetic or weight.
  2. Name each force’s formula. Electric: F = qE. Magnetic: F = qvB. Sizes first. Then directions: plate signs, and the right hand reversed for a negative charge.
  3. Say if the forces balance. Straight path or steady speed: Fnet = 0. The forces are equal and opposite.
  4. Set the sizes equal and solve. |qE| = |qvB|. The q cancels. Solve: v = E/B, E = vB or B = E/v.
  5. Check the arrows and the unit. Are the two arrows opposite? Does the unit come out right?

Check: Do the two force arrows point in opposite directions? Does N/C divided by T give m/s?

Used again in: the proton problem on the choosing-the-tool slide, and the magnetic force against gravity slide in B14.

Givens (the question in slide 2): an electron goes straight through crossed fields with E = 1.20 × 10³ N/C and B = 3.00 × 10⁻³ T. The top plate is positive and B points into the page.

1Draw the forces2Name each force3Say they balance4Set sizes equal5Check it

Run-through: the electron that goes straight through

The question from slide 2, step by step. Find the speed of the electron that goes straight through.

  1. Step 1The electron moves right. E points down, so the electric force is up. The magnetic force is down. The arrows are opposite.
  2. Step 2Electric force: F = qE. Magnetic force: F = qvB, where v is the unknown.
  3. Step 3The path is straight, so Fnet = 0 and the sizes are equal.
  4. Step 4qE = qvB, so v = E/B = (1.20 × 10³) ÷ (3.00 × 10⁻³) = 4.00 × 10⁵ m/s.
  5. Step 5Check: (1.60 × 10⁻¹⁹)(1.20 × 10³) = 1.92 × 10⁻¹⁶ N and (1.60 × 10⁻¹⁹)(4.00 × 10⁵)(3.00 × 10⁻³) = 1.92 × 10⁻¹⁶ N. They match, and N/C ÷ T is m/s.

Choosing the tool

On a small screen, scroll sideways to read the labels.

You now have four ways to solve a particle problem. This slide helps you choose.
Givens: you now have several tools for a charged particle in fields. A problem usually names one of them in a cue: a path that goes straight, a circle, an accelerating potential difference, or two forces at once. Crossed fields means an electric field and a magnetic field at right angles to each other.

cue in the problemfirst equation to writegoes straight through|Fe| = |Fm|, so v = E/Baccelerated from rest through ΔVqΔV = ½mv²moves in a circleqvB = mv²/rforce from two fieldsadd Fe and Fm as vectorsmoves along the fieldv⊥ = 0, so Fm = 0

Read the cue, pick the equation

Do not hunt for a formula that fits the numbers. Find the cue first.

  • Straight path: Fnet = 0.
  • Circle: the magnetic force is the net force.
  • Accelerated from rest through ΔV: energy gained is qΔV.
  • Two cues: one equation per cue, in order.
  • Crossed fields: E and B at right angles.
  • v⊥ is the part of v across the field.
  • At rest, or along the field: v⊥ = 0, so the magnetic force is 0.

Givens: three cases are listed. Case 1 describes an electron accelerated from rest through 400 V that then moves in a circle in a magnetic field. Case 2 describes a proton that passes straight through plates and a magnetic field. Case 3 describes a positive ion that moves along a magnetic field line. Question: for each case, write the first equation or statement you would use.

1 accelerated from rest through 400 V, then moves in a circle2 passes straight through plates and a magnetic field3 moves along a magnetic field line

Name the first equation

There are three cases and three cues. Do not calculate. Name the first equation and the cue.

  1. Underline the cue in each case.
  2. Case 1: what happens before the field, and after?
  3. Case 2: what does a straight path say about Fnet?
  4. Case 3: how does the motion compare with the field? What happens to v⊥?

Diploma: write the idea in words next to each equation.

Starting point if needed

Look for the cue in each case: accelerated, straight, along the field.

Compare after your attempt

Case 1: qΔV = ½mv² gives the speed, then qvB = mv²/r gives the radius.

Case 2: the path is straight, so the net force is zero and qE = qvB. Case 3: the ion moves along the field, so v⊥ = 0 and the magnetic force is zero.

New situation: a proton starts at rest and is accelerated through a potential difference, then enters crossed fields of E = 1.20 × 10³ N/C and B = 3.00 × 10⁻³ T and goes straight through. Question: what potential difference accelerated the proton? The proton’s mass is 1.67 × 10⁻²⁷ kg.

+E = 1.20 × 10³ N/C, B = 3.00 × 10⁻³ T

Changed context: from rest to a straight path

This one runs backward. The proton is accelerated from rest, then goes straight through crossed fields. Solve from the end.

  1. The straight path gives the speed: v = E/B. You do not need the mass or charge.
  2. From B6: qΔV = ½mv².
  3. Solve: ΔV = mv² ÷ (2q), with the proton’s mass and charge.
  4. Check that ΔV is a sensible size.
Compare after your attempt

The straight path gives v = E/B = (1.20 × 10³)/(3.00 × 10⁻³) = 4.00 × 10⁵ m/s.

qΔV = ½mv² gives ΔV = mv²/(2q) = (1.67 × 10⁻²⁷)(4.00 × 10⁵)²/[2(1.60 × 10⁻¹⁹)] = 835 V.

Practice question

An electron moves at 4.0 × 10⁵ m/s through a magnetic field of 3.0 × 10⁻³ T and an electric field of 600 N/C. The two forces are in opposite directions. Find the size of the net force on the electron.

Hint

Find each force. They are opposite, so subtract.

Compare after your attempt

Fm (the magnetic force) = qvB = (1.60 × 10⁻¹⁹)(4.0 × 10⁵)(3.0 × 10⁻³) = 1.92 × 10⁻¹⁶ N. Fe (the electric force) = qE = (1.60 × 10⁻¹⁹)(600) = 9.60 × 10⁻¹⁷ N. Fnet (the net force) = 1.92 × 10⁻¹⁶ − 9.60 × 10⁻¹⁷ = 9.60 × 10⁻¹⁷ N, in the direction of the magnetic force.

Practice question

A proton moves at 2.0 × 10⁵ m/s through a magnetic field of 0.0400 T. What electric field strength makes it go straight through?

Hint

A straight path means qE = qvB.

Compare after your attempt

Straight path means qE = qvB, so E = vB = (2.0 × 10⁵)(0.0400) = 8.0 × 10³ N/C.

Practice question

Fields E = 600 N/C and B = 1.50 × 10⁻³ T are at right angles. What speed passes straight through, and does the answer change for an alpha particle?

Hint

Use v = E/B. Then check what cancelled to give that rule.

Compare after your attempt

v = E/B = 600/(1.50 × 10⁻³) = 4.00 × 10⁵ m/s. The answer does not change for an alpha particle, because the charge and the mass cancel from qE = qvB.

Practice question

In a velocity selector with the top plate positive and the field into the page, a proton moves right slightly slower than E/B. Does it bend up or down?

Hint

Which force changes with speed? Which force is now larger?

Compare after your attempt

The electric force on a proton is down and the magnetic force is up. At a lower speed the magnetic force is smaller than the electric force, so the net force is down and the proton bends down.

Practice question

Why is only the acceleration at the instant of entry asked for in a problem with both an electric and a magnetic field?

Hint

What happens to the direction of the magnetic force as the path bends?

Compare after your attempt

As the particle changes direction, the magnetic force changes direction while the electric force stays fixed, so the two forces are no longer opposite. The later motion is too complicated to find with the tools of this course.

Challenge question

Challenge: A velocity selector has E = 1.20 × 10³ N/C and B = 3.00 × 10⁻³ T. A proton (m = 1.67 × 10⁻²⁷ kg, q = 1.60 × 10⁻¹⁹ C) passes straight through it. The proton then enters a region that has only the same magnetic field, at right angles to its velocity. What is the radius of its path there?

Hint

Two cues: a straight path gives the speed, then a circle gives the radius.

Compare after your attempt

In the selector the path is straight, so v = E/B = (1.20 × 10³) ÷ (3.00 × 10⁻³) = 4.00 × 10⁵ m/s. In the magnetic field alone, qvB = mv²/r, so r = mv ÷ (qB) = (1.67 × 10⁻²⁷)(4.00 × 10⁵) ÷ [(1.60 × 10⁻¹⁹)(3.00 × 10⁻³)] = 1.39 m. This is how a mass spectrometer works: one speed is selected, then the radius shows the mass.