B8 · The ideal gas law, PV = nRT · Notes

Goals: State the ideal gas law and what each symbol stands for. Put every value into the units that match the gas constant. Use the ideal gas law to find a volume, a pressure, an amount or a mass.

Type in the blanks, or print this page and write on it. Your notes save on this device only. Nothing is sent to anyone.

Name: ______________________________   Date: ______________

Slide 1 of 6 · A gas that is not at STP or SATP

In lesson B7 the molar volume linked moles and litres. It only worked at STP and SATP. Today you get a law that works anywhere.

STP0 °C101.325 kPa22.4 L/molSATP25 °C100 kPa24.8 L/molanother gas22 °C150 kPa? L/molWhat is the volume of one mole?

Key ideas

The molar volume is L/mol at STP.

Most gases in a lab are at some other and temperature.

The can change a gas to STP, but that is slow.

Example

Can you use 24.8 L/mol for a gas at 150 kPa and 22 °C? Say why or why not.

Try it

Name the two things from earlier lessons that you could use together for a gas that is not at STP.

Slide 2 of 6 · The ideal gas law

The last slide asked for one law that works at any pressure and temperature. This slide gives it.

PV = nRTPpressure, kPaVvolume, Lnamount, molTtemperature, KR = 8.314 kPa·L/(mol·K)R is the gas constant.

Key ideas

The ideal gas law is .

The letter n is the of gas in moles.

R is a fixed number called the .

R = kPa·L/(mol·K).

Example

Write the ideal gas law. Say what each of P, V, n and T stands for.

Try it

Use PV = nRT, with R = 8.314 kPa·L/(mol·K), and T (K) = t (°C) + 273. STP is 0 °C and 101.325 kPa. Use the law to find the volume of 1.00 mol of gas at STP.

Slide 3 of 6 · The units must match R

The last slide gave the gas constant R with its units. Those units decide the units of everything else.

symbolunitif the question gives something elsePkPachange atm or mm Hg to kPa (lesson B1)VLdivide mL by 1000nmolchange grams with the molar massTKadd 273 to °C (lesson B2)

Key ideas

Pressure must be in .

Volume must be in .

Temperature must be in .

To change millilitres to litres, divide by .

Example

A question gives a volume of 250 mL and a temperature of 22 °C. What do you change before you use the ideal gas law?

Try it

Use 1 atm = 101.325 kPa. A question gives a pressure of 1.20 atm. What is it in kPa, ready for the ideal gas law?

Slide 4 of 6 · Finding a volume or a pressure

The last slide set the units. Now you use the ideal gas law to find a volume, then a pressure.

n = 0.500 mol, P = 125 kPa, T = 30 + 273 = 303 KV = nRT / PV = (0.500 mol × 8.314 × 303 K) / 125 kPaV = 10.1 L

Key ideas

To find a volume, divide both sides by .

So V = .

To find a pressure, divide both sides by .

Example

Use PV = nRT, with R = 8.314 kPa·L/(mol·K), and T (K) = t (°C) + 273. What is the volume of 1.00 mol of gas at 150 kPa and 27 °C?

Try it

Use PV = nRT, with R = 8.314 kPa·L/(mol·K), and T (K) = t (°C) + 273. 0.500 mol of gas is in a 10.0 L tank at 27 °C. What is the pressure?

Slide 5 of 6 · Finding moles, then mass

The last slide found a volume and a pressure. The ideal gas law can also tell you how much gas there is.

P = 150 kPa, V = 8.00 L, T = 295 Kn = PV / (RT)n = (150 kPa × 8.00 L) / (8.314 × 295 K) = 0.4893 molm = 0.4893 mol × 28.02 g/molm = 13.7 g of N₂

Key ideas

To find the amount, n, divide both sides by .

So n = .

Moles change to grams with the .

Example

Use PV = nRT, with R = 8.314 kPa·L/(mol·K), and T (K) = t (°C) + 273. The molar mass of N₂ is 28.02 g/mol. What is the mass of 4.00 L of nitrogen gas at 100 kPa and 25 °C?

Try it

Use PV = nRT, with R = 8.314 kPa·L/(mol·K), and T (K) = t (°C) + 273. The molar mass of CO₂ is 44.01 g/mol. What is the mass of 2.00 L of carbon dioxide at 150 kPa and 30 °C?

Slide 6 of 6 · Method: how to answer an ideal gas law question

You just used the ideal gas law four times. Each time you did the same things. Here they are as steps.

1List P, V, n and T. One is unknown.2Change to kPa, L, mol and K.3Rearrange PV = nRT for the unknown.4Calculate and round.5Change moles to grams, if asked.list1units2rearrange3answer4mass5Check: at SATP, one mole fills about 24.8 L.Used again in: gas questions in Unit D

Key ideas

Step 1: P, V, n and T. One is unknown.

Step 2: to kPa, L, mol and K.

Step 3: PV = nRT for the unknown.

Step 4: and round. Step 5: change moles to grams, if asked.

Example

Use PV = nRT, with R = 8.314 kPa·L/(mol·K), and T (K) = t (°C) + 273. Use the steps. What is the volume of 3.00 mol of gas at 250 kPa and 50 °C?

Try it

Use PV = nRT, with R = 8.314 kPa·L/(mol·K), and T (K) = t (°C) + 273. Use the steps. How many moles of gas are in 25.0 L at 100 kPa and 27 °C?