B3 · Boyle's law: pressure and volume · Completed notes

Goals: Describe how the pressure of a trapped gas changes when its volume changes. State Boyle's law and the two things that must stay the same. Use Boyle's law to find a pressure or a volume.

These are the completed notes. The blanks are filled in and each question is worked.

Slide 1 of 5 · Squeezing a trapped gas

Lessons B1 and B2 gave you the units for pressure and temperature. Now you start to link the four things we measure.

beforeafter60.0 mL100 kPa30.0 mL200 kPa

Key ideas

The syringe is sealed, so no air can get in or out.

The volume was cut in half.

The pressure doubled.

Example

In the syringe test, which two of the four things we measure were kept the same?

  1. The syringe is sealed, so the amount of air stays the same.
  2. The room does not change, so the temperature stays the same.

Try it

A trapped gas is squeezed into half its volume. What happens to its pressure?

  1. The temperature and the amount of gas stay the same.
  2. The pressure doubles.

Slide 2 of 5 · Pressure times volume stays the same

On the last slide the pressure doubled when the volume was cut in half. Now look at more readings.

volume (mL)pressure (kPa)P × V60.0100600030.0200600020.0300600015.04006000The amount of air and the temperature stayed the same.

Key ideas

Each time the volume went down, the pressure went up.

Pressure times volume is always the same number.

The amount of air must stay the same.

The temperature must stay the same.

Example

A trapped gas is at 100 kPa and 40.0 mL. Its volume is cut to 10.0 mL. Use "pressure times volume stays the same" to find the new pressure.

  1. Pressure times volume is 100 × 40.0 = 4000.
  2. The new pressure is 4000 ÷ 10.0 = 400 kPa.

Try it

A trapped gas is at 200 kPa and 12.0 mL. Its pressure drops to 100 kPa. Use "pressure times volume stays the same" to find the new volume.

  1. Pressure times volume is 200 × 12.0 = 2400.
  2. The new volume is 2400 ÷ 100 = 24.0 mL.

Slide 3 of 5 · The graph for Boyle's law

The last slide showed the results as a table. A graph of the same results makes the pattern easy to see.

volume (mL)pressure (kPa)Volume up,pressure down.The dots are thefour results.

Key ideas

On the graph, volume goes along the bottom.

The dots make a curve that falls.

As the volume gets bigger, the pressure gets smaller.

Pressure and volume are inversely related.

Example

Draw the shape of the graph of pressure against volume for a trapped gas. Say what the shape shows.

  1. The graph is a curve that falls from left to right.
  2. It shows that pressure gets smaller as volume gets bigger.

Try it

What does "inversely related" mean for pressure and volume?

  1. When one goes up, the other goes down.
  2. A bigger volume means a smaller pressure.

Slide 4 of 5 · Boyle's law as a formula

The last two slides showed the pattern as a table and as a graph. Now you write it as a formula.

P₁V₁ = P₂V₂before the changeafter the changeThe temperature must stay the same.The amount of gas must stay the same.

Key ideas

P₁ and V₁ are the pressure and volume before a change.

P₂ and V₂ are the pressure and volume after the change.

Boyle's law only works when the temperature and the amount of gas stay the same.

Both pressures must be in the same unit.

Example

Write Boyle's law as a formula. Say what the small 1 and the small 2 stand for.

  1. P₁V₁ = P₂V₂.
  2. The 1 is for before the change. The 2 is for after the change.

Try it

One pressure is in kPa and the other is in atm. What must you do before you use the formula?

  1. Both pressures must be in the same unit.
  2. Change one of them first.

Slide 5 of 5 · Using Boyle's law

The last slide gave Boyle's law as a formula. Now you use it to find a volume and a pressure.

P₁ = 120 kPa, V₁ = 6.00 L, P₂ = 300 kPa, V₂ = ?V₂ = P₁V₁ / P₂V₂ = (120 kPa × 6.00 L) / 300 kPaV₂ = 2.40 L

Key ideas

To find the new volume, use V₂ = P₁V₁ / P₂.

When the pressure goes up, the volume goes down.

When the volume goes up, the pressure goes down.

Example

Use Boyle's law, P₁V₁ = P₂V₂. The temperature and the amount of gas do not change. A gas fills 9.00 L at 100 kPa. It is squeezed until the pressure is 150 kPa. What is the new volume?

  1. P₁ = 100 kPa, V₁ = 9.00 L, P₂ = 150 kPa.
  2. V₂ = P₁V₁ / P₂ = (100 kPa × 9.00 L) / 150 kPa = 6.00 L.
  3. The pressure went up, so the volume went down.

Try it

Use Boyle's law, P₁V₁ = P₂V₂. The temperature and the amount of gas do not change. A gas fills 3.00 L at 80.0 kPa. It is squeezed to 2.00 L. What is the new pressure?

  1. P₁ = 80.0 kPa, V₁ = 3.00 L, V₂ = 2.00 L.
  2. P₂ = P₁V₁ / V₂ = (80.0 kPa × 3.00 L) / 2.00 L = 120 kPa.
  3. The volume went down, so the pressure went up.